HARDWARE |
SOFTWARE |
H4 booster with 4.0 A continuous-load output |
DCC with 14, 28, 128 speed steps |
| H4 programming track connection, 0.6 A rated |
LGB® MTS® compatible function key handling |
| NMRA DCC Bidirectional Feedback detector with integrated cutout device |
Märklin® Motorola® old, new, with 14, 27 or 28 speed steps |
| 7 inch QVGA FSTN LCD display with touch screen and sextuple LED backlight (white) |
Up to 9999 addresses for DCC protocol. Up to 20 function keys per loco. |
| 32-bit ARM 720T controller, 64 MByte flash ROM, 32 MByte RAM, Linux operating system |
Up to 255 addresses for Märklin® Motorola® protocol. |
| 16 bit real-time co-processor |
Up to 16384 locos |
| 2 motor driven potentiometer throttles with end stop |
Up to 2048 turnouts |
| 2 two way analog joysticks |
1024 route objectives |
| 2 8-function keys, plus stop – and go key |
32 MU’s (multiple consists) with up to 16 locos each |
| 3 input sockets for ECoSlink systems |
Up to 8 shuttle trains (back’n forth) at the same time |
| Connection for ECoSlink Bus Expansion |
|
| Galvanically isolated Booster input for External Boosters |
Märklin® Motorola® and DCC track protocol for control of electromagnetic. accessories. |
| Galvanically isolated ECoSniffer input for connection of old units |
All DCC service modes programming on programming track, POM (programming on the main) |
| Galvanically isolated s88-Bus input for feedback devices |
Programming of Motorola® and Selectrix® decoders on programming track |
| 10/100 MBit Ethernet-connection (RJ 45) |
Selectrix® track format |
| 1 ECoSlot module for radio-receiver input |
|
| Power supply 90 VA |
|