SCFXD Super Chief Xtra - Duplex Radio

The Digitrax Super Chief Xtra - Duplex brings all the benefits of their top of the range 5 Amp DCC System with the bonus of totally tether free operation.

The DT402D Super Throttle & DCS100 Command Station Offer

• User interface makes DCC simple.

• Dual throttle controls.

• Full numeric key pad.

• Simplified 4 digit addressing.

• Easy address browsing and selection.

• User friendly text messages to guide you.

• Click encoders for smooth speed control.

• Multi-line LCD display puts all information at your fingertips.

• Duplex Radio and Infra-ready out of the box.

• Ready for transponding and cab signaling.

• Simplified throttle option setup.

Big System Capacity for Big Layouts

• Run up to 120 addresses at the same time on your system.

• Run up to 120 throttles at the same time on your system.

Over 9000 Locomotive Addresses

• Address 00 for operation of one loco or MU consist without decoders

• Two Digit Addressing is easy to use. (Address 01-127)

• Four Digit Addressing lets you use the road number of your engines as their addresses. (Address 0128-9000+)

5 Amps of Power to Run More Trains

• Selectable Scale Voltage for Safe Operation in ALL Scales

• 8 Amp Version Also Available

Function Control

• Control 29 functions-F0 through F28.

• Function 2 is a special non-latching key that can be used to sound the horn for as long as the key is held down.

• Constant brightness lighting. Headlights can be directional or independently controlled (depending on decoder capabilities).

Two DCC Outputs are Better than One!

• Use one output for programming decoders while the other runs the layout. No need to shut down the layout to program decoders!

• Use one output for a braking section while the other runs the layout.

Decoder Programming

• Built in read/write programmer lets you program and read back CV values.

• Supports Paged programming (Digitrax preferred method). Also supports direct, register and ops mode programming

Consisting

• Supports Universal consisting (Digitrax preferred method). Allows ALL locos to be consisted prototypically, even analog locos.

• Advanced consisting and Basic consisting, too!

• Nested consisting where consists can be consisted together.

Stationary Decoders, Turnout Control & Turnout Position Reporting

• Access to stationary decoder control for turnouts and other devices.

• DT402 reports turnout position based on last command sent.

• Control 999 stationary decoder addresses.

Routes

• Turnout List/Route capability to simplify complex yard operations.

Customizable System Options

• User adjustable voltage trim.

• Turn audible warnings on or off.

• Set up purging options.

• Multi-format command station mode.

• DCS100 is the most flexible command station on the market.

Expandability

• Super Chief Xtra is just the beginning for large, complex layouts that emphasize prototypical operations.

• With LocoNet you can add more boosters, throttles, power management, detection, transponding, signaling and much more.