ZIMO MX645 Sound Decoder
The MX645 is one of the latest generation of ZIMO sound decoders with wire harnesses for OO/HO and some O use. They have advanced capabilities, good continuous load rating and high power sound output. The MX645 has a wire harness only, no plug.
GENERAL
30 x 11 x 4mm.
14, 28 or 128 speed step (256 or 1024 internal steps).
Ops and service mode programming.
Built in capacitor support 1<2 seconds.
Drive on DC
Software upgradeable (Requires MXDECUP module or a ZIMO DCC System).
Overload and overheat protected.
Motor Drive
1.2Amp continuous, 1.5 Amp peak.
Silent motor drive at 20 or 40 kHz.
Suitable for all DC motors including coreless.
Individual speed curves.
Automatic drive optimization but can be manually adjusted.
Functions
10 function outputs including 2 for SUSI/Logic level. Max total all functions 0.8 Amps.
Full function mapping F0 to F12.
Full lighting functions; dim, flash, mars, strobe etc..
Train Control & Feedback
Brake on DC.
Lenz ABC (asymmetric brake control).
Zimo braking modes.
Constant braking distance.
RailCom equipped.
Sound
Amplifier- 3 Watt.
16 Bit sound mixing.
32 Mbit sound storage.
Speaker Impedence - 4 to 8 Ohms.
Steam chuff synchronisation can be by CV or by using a hardware trigger, e.g. a cam or other sensor, installled by the user.
As standard this decoder is loaded with five generic steam and one diesel sound schemes; selectable by CV.
This decoder can be programmed, at a nominal cost (1p), with any of the DigitrainSound ZS sound files. See the list at http://www.digitrains.co.uk/manufacturers/digitrainsound.aspx, email or call for details of our excellent and ever expanding range of genuine UK loco recordings.
This decoder is fitted with connecting wires but a SPEAKER IS NOT INCLUDED.
Order number: MX645
Manufacturer:
Zimo
Back