DS024G LMS GARRATT SOUND FOR LOKSOUND

More Views

DS024G LMS GARRATT SOUND FOR LOKSOUND

Availability: In stock (10)

£0.01

This is a nominal cost preloadable soundfile for you Loksound decoder purchase. Cannot be bought on it's own. 

OR
Description

Details

Sound Decoder Function Key DS024G LMS Garratt Project

A generic soundalike project prepared using available articulated loco sounds and LMS whistles.

There are no claims made for genuine authenticity.

F0 Lights if Fitted

F1 Sound on/off + Aux 1

F2 Playable Whistle

F3 Short Whistle

F4 Safety Valve

F5 Fireman, Plus Aux 1 configured for firebox glow if fitted, green wire.

F6 Guard’s Whistle

F7 Buffer up and coupling

F8 Configured for Seuthe smoke unit if fitted on Aux 2, purple wire.

F9 Injector

F10 Rail clack

F11 Cylinder blow out

F12 Sanding valve

F13 Brake release / set

F14 Air pump

F15 Rail clank

For “Auto tune up” if loco jerky at low speed. Put loco on track and select address Ensure enough room for loco to run for a few seconds while procedure takes place Set CV54 to 0, Program on main. Press F1 Loco will set off and learn all relevant motor settings. When it stops the sound will start and the process is complete. For the full English Loksound V4.0 manual please go to the South West Digital website and download a copy from there.

Delivery & Returns

Delivery & Returns

If returning any product please can you ensure you send it back to us with proof of purchasing, a covering letter and contact details. See terms and conditions for full information on our returns policy.