Sound Decoder Function Key DS 411 3rd Rail DC Electric Heritage EMUs
F0 Lights if Fitted
F1 Sound on/off
F2 Double horn
F3 Double horn
F4 Driver’s cab bell
F5 Platform whistle
F6 Station ambience (40 sec single play back or loop)
F7 Door slam
F8 Compressor loop
F9 Wheel flange loop
F10 Rail clack loop
F11 Brake squeal
F12 Air whistle 1
F13 Air whistle 2
F14 Aux 1
F15 Aux 2 CV63 for overall volume range 0-192 For “Auto tune up” if loco jerky at low speed. Put loco on track and select address Ensure enough room for loco to run for a few seconds while procedure takes place Select programming on the main line, then set CV54 to value 0. Exit programming, then press F1. Loco will set off and learn all relevant motor settings. When it stops the sound will start and the process is complete.
For Warranty information and full English manual download available from South West Digital website.
The idea of Digitrains was conceived over the dinner table and grew very slowly as doubts calmed missionary zeal. We finally took the plunge in January 2005 and are fortunate to be dealers for some of the best and most user friendly DCC equipment available.