The DHWH harness is part of the Digitrax Easy Connect system--a Digitrax 9- pin plug on one end for connecting into the decoder’s 9-pin socket and wires on the other end to solder to the locomotive.
The Digitrax 9-pin connector is used by many other DCC companies, too! Using this arrangement it’s easy to unplug the decoder from the locomotive. This is useful if you have many locomotives to equip and a limited budget. It also makes it easy to unplug a decoder and try a different one if you suspect a problem with a decoder.
1. Simply solder the wires following the wiring diagram in Figure 1. See the Digitrax Decoder Manual for additional information.
2. Plug the 9-pin plug into the 9-pin socket on the decoder. The plug is notched to fit easily into the socket in only one orientation.
3. Once the harness is installed, you can run your loco on DC with the decoder removed, just install a DHDP dummy plug into the wire harness plug. (DHDP sold separately.)
4. The harness supports F0F (White) and F0R (Yellow). The harness has two additional function leads (F1, Green and F2, Violet) for decoders that have additional function capabilities.
| Featured Product | No |
|---|
MENU
