MXTAPS DECODER TESTER FOR SMALLER DECODERS

Zimo MXTAPS, with all interfaces The basic features are:

- the carrier mating connectors for all current ZIMO decoders used interfaces,

PluX12, -16, -22, Next18, MTC21, NEM651, NEM652 (all NMRA or VHDM standardized) (ZIMO proprietary).

- connection to MXULF or ZIMO base unit or other digital centers on "TRACK", and possible with "SUSI" cable .

- To test the decoders are available on the board:

DC test motor, speaker (1 Watt), various LEDs for 10 function outputs as well as terminals for wires to external consumers .

Conventional interconnection of the decoder update and sound-location device MXULFA with MXTAPS:

MXTAPS is connected via the terminal double "BAR" to the output "track" of MXULFA or on a rail output a ZIMO base unit or another command station.

There is no additional supply needed.

If necessary, the "SUSI" connector of MXULF and MXTAPS (-V) are connected to each other (as when a MX10 is used): via "SUSI" is a much faster sound Load as possible on the "rail". For decoders with the interfaces "PluX", "MTC", "Next" "SUSI" automatically lies on the "SUSI" interface of MXTAPS (-V) and can easily become MXTAPS (-V) are passed.

A special feature together with ZIMO sound decoders: Simultaneous sound loading multiple decoder is about "SUSI" possible: Each decoder must be connected to a separate Decoder Test and connector board MXTAPS. The connection boards with each other are configured in parallel, which can be made for the "SUSI" -Parallelschaltung by the presence of two "SUSI" connectors through daisy chaining.