ADAMTC ADAPTER BOARD FOR MTC 21 PIN

£20.00

ZIMO

ORDER NUMBER : ADAMTC

Availability: In stock
Only 2 left
SKU
ADAMTC

ADAPTER BOARD FOR MTC 21 PIN

Adapter board for "21MTC&Quot;-decoders; the decoder is plugged into the pin connectors of the adapter board. Via solder pads the wiring inside the loco is very comfortable. The adapter board ADAMTC is equipped with a rectifier which relieves the decoder's rectifier and so produces less lost heat and performs better.

The adapter board ADAMTC can be used with all "21MTC" decoders that are S-type - therefore MX631C, MX634C, MX638C, MX636C, MX644C, etc. and their successors.

DO NOT USE MX631D, MX634D, MX636D, MX638D and MX644D, whereby some of themcan be configured to the corresponding C-type by pseudo-programming: CV#8 = 3.

For the connected decoder, the values of the supported energy storage modules only change to 16V/max 6800µF, if the energy storage module is connected to the corresponding solder pads/screw terminals of the ADAMTC/ADAMKL boards.

More Information
Featured Product No

Best Selling Products

OUR STORY

ESTABLISHED IN 2005

The idea of Digitrains was conceived over the dinner table and grew very slowly as doubts calmed missionary zeal. We finally took the plunge in January 2005 and are fortunate to be dealers for some of the best and most user friendly DCC equipment available.

READ THE FULL STORY

or

Watch our video

Please be aware that we no longer accept cheques as payment