860013 (Dimension is 14.5x8.5x3mm) 2 Function decoders with NEM651 6 pin,
Function Rating at 100 mA,
Total rating at 1.0 Amp continuous, 2.0 Amp peak. Note: If your decoders CV7=1, your decoders will be only with 0.5A continuous rating.
All the wire colours follow NMRA NEM651 standard.
PIN1 on the shrink film is marked with a star sign: *
Attention: Operation over current rating will damage your decoders.
For full spec see http://laisdcc.com/LaisDcc_Decoders_Manual_V2.pdf Rating:
Scale: HO & N scale
Standard: NMRA DCC
Does Not Support: ABC, Railcom, Motorola or High power stay alives.
Brand: LaisDcc
Total support of all NMRA/NEM specifications
Super smooth high frequency silent drive motor control.
Switchable DC running 4 digit addressing and 14, 28 or 128 speed steps.
2 active functions each safe to 100mA
Support for all common programming & consist modes.
Back EMF with step-variable or Fn button control.
Fully adjustable motor control and function actions.
Easily locked once adjustment or set-up is complete.
All special lighting effects available.
All functions able to be re-allocated (remapped) as required.
Heat-shrink insulated for short-free installation.
Economical enough to use as lighting decoders.
Reset by CV8=4 or CV30=4
LaisDcc motor decoders can be also used as function decoders. You just need to connect a 560ohm/0.25W resistor between the motor terminals to make it to a dummy load/motor. Then you can use it as a function only decoder and you can change the mapping and light effects after the installation. You do not need to take it out to connect to a motor to do the CV settings.