This is a nominal cost preload for your selected Loksound/ESU sound decoder purchase. Cannot be purchased on its own.
Remember to specify 8 or 21 pin fitment.
Also available as a £10.00 sound decoder reblow plus postage which will vary if you send the decoder or the whole loco. Check decoder type and soundfile match. Please telephone or email to arrange this service.
NEW v4 Class 56
F
FUNCTION
SET FUNCTION BUTTON TO MOMENTARY OR LATCH
NOTE
0
LIGHTS
LATCH
1
SOUND ON/OFF
LATCH
2
RANDOM HORNS
3
S HORN
4
STRAIGHT AIR
5
FLANGE SQUEAL
LATCH
MOTION AND SPEED DEPENDENT
6
DOOR
7
FAN
LATCH
8
VOLUME
SCROLL (ON/OFF RAPIDLY IF LATCHED) THRU FOUR SETTINGS OR HOLD FOR MUTE
9
FADE VOLUME
10
COMPRESSOR
LATCHED ON, COMP WORKS WHEN RQD
11
12
SPIRAX
LATCH
Project designed to work on 128 speed steps
On setting off, (step settings approximate)from a stand selecting 1-32 steps gently pulls away, selecting over 32 throttles right up then drops down to the Drive sound appropriate to the speed
1-16 = D1
16-32 = D2
32-75 = D3
75+ = D4
gentle decceleration drops down thru the Drive steps
rapid deceleration reverts to coast / idle
The idea of Digitrains was conceived over the dinner table and grew very slowly as doubts calmed missionary zeal. We finally took the plunge in January 2005 and are fortunate to be dealers for some of the best and most user friendly DCC equipment available.