01522 527 731

[email protected]
Menu
Account
Advanced Search
Cart 0 Shopping Cart
main product photo
Loading...

WOW101STEAM 1516 STEAM SOUND 9 PIN JST

£92.40

The WOW101 US Steam sound decoder is a universal decoder for locomotives with DCC-ready 9-pin plugs, or locomotives which cannot accommodate a motherboard or WOWKit. This decoder may be hard-wired or plugged directly into any locomotive with a 9-pin JST plug. The WOW101 is compatible with any T-Series harness, and also includes an auxiliary harness for attaching your speaker, KAM, Keep Alive®, and for the additional lighting functions (F3 and F4).

 

Availability: Out of stock
SKU
WOW101STEAM
Notify me when this product is in stock
Add to Wish List Add to Compare

1516 USA STEAM SOUND 9 PIN JST

The WOW101 is a universal decoder for locomotives with DCC-ready 9-pin plugs, or locomotives which cannot accommodate a motherboard or WOWKit. This decoder may be hard-wired or plugged directly into any locomotive with a 9-pin JST plug. The WOW101 is compatible with any T-Series harness, and also includes an auxiliary harness for attaching your speaker, CAM, Keep Alive®, and for the additional lighting functions (F3 and F4).

For a complete list of sounds, check out the "Sounds List" under the "Documents" tab.

  • CD-Quality Sound:

TCS' world-renowned CD-quality sound. 16 Bits of resolution at 44.1kHz sample rate.

  • Back EMF Load Compensation:

Provides superior slow speed control and high performance under load.

  • Quiet Drive:

Super-quiet motor control for "buzz" free motor performance.

  • DC Mode:

Decoder will automatically detect DC power. You can also configure how your lighting effects function on DC.

  • Variable Momentum:

Allows you to make custom acceleration and deceleration curves.

  • Incandescent Bulb Support:

This decoder can be used with 12 Volt bulbs.

  • Function Remapping:

Buttons 0 through 12 may be used to control the lighting functions of this decoder.

  • Programmable Lighting Effects:

Choose from 20 separate user-programmable lighting effects!

  • Dimmable Brightness:

Configure multiple different brightness levels for your LED's or incandescent bulbs.

  • Decoder Lock:

Feature which prevents accidental/unwanted programming while activated.

  • Airwire™ Compatible:

Fully compatible with Airwire™ operation.

  • CAM:

Use a positive voltage trigger to synchronize your chuff rate to your drivers' rotation.

  • Audio Assist®:

TCS exclusive auditory feedback programming system. Program your decoder without the need to memorize CV's!

  • User-Loadable Speed Tables:

Configure custom speed curves and set speed limits.

  • Throttle Modes:

Choose from multiple throttle modes to meet your operating needs.

  • True Scale Sound:

A unique WOWSound feature which uses TCS’ exclusive auto-adjusting BEMF technology to automatically change the intensity of the chuff. Prototype Mode also offers dynamic sound volumes which accurately model the real-life equivalent. Also includes pre-programmed acceleration and deceleration values.

Interface Type
Hard-Wire
Direct-Plug (9-Pin JST)
Dimensions (L x W x H): 1.35” x .66” x 0.22” or 34.29mm x 16.72mm x 5.59mm
Scale: HO Scale
Continuous/Peak: 1.3/2.0 Amp
Total Functions: 6
Function Rating: 100 mA
12V Outputs
6

Speaker Selection

  • This decoder is optimized for 8 Ω speakers (not included).
  • This decoder uses and audio amplifier capable of supplying up to 2 Watts of power. A 1 Watt minimum power rating is recommended for use with this decoder. If you are using a speaker with less than 1 Watt power rating, you must reduce your volume to prevent speaker failure or amplifier stress.
  • Speaker enclosures greatly increase speaker performance in most cases.
More Information
Features & Specification
Interface Type
Hard-Wire
Direct-Plug (9-Pin JST)
Dimensions (L x W x H): 1.35” x .66” x 0.22” or 34.29mm x 16.72mm x 5.59mm
Scale: HO Scale
Continuous/Peak: 1.3/2.0 Amp
Total Functions: 6
Function Rating: 100 mA
12V Outputs
6

Speaker Selection

  • This decoder is optimized for 8 Ω speakers (not included).
  • This decoder uses and audio amplifier capable of supplying up to 2 Watts of power to an 8 Ohm load at maximum volume. An 8 Ohm speaker with a 1 Watt minimum power rating is recommended for use with this decoder as it comes out of the package. If you are using an 8 Ohm speaker with a power rating of 2 Watts or less, you must reduce your master volume to prevent speaker failure or amplifier stress.
  • The amplifier(s) on a WOWSound product can support speakers with impedance ratings as low as 4 Ohms. A reduction in impedance will require a higher power dissipation rating (more Watts) on said speaker. The minimum power requirement for a 4 Ohm speaker is 4 Watts. If you are using a 4 Ohm speaker with a power rating of 4 Watts or less, you must reduce your master volume to prevent speaker failure or amplifier stress.
  • Speaker enclosures greatly increase speaker performance in most cases - improving the apparent volume by more efficiently directing the flow of air and reducing or eliminating destructive interference.
Featured Product No

Best Selling Products

  1. 860021 4 FUNCTION DECODER WITH 8 PIN HARNESS

    860021 4 FUNCTION DECODER WITH 8 PIN HARNESS

    £13.50
  2. 870009 STAY ALIVE UNIT 6-20 SECONDS 27x10x9mm

    870009 STAY ALIVE UNIT 6-20 SECONDS 27x10x9mm

    £13.50
  3. DFJ003U DUAL FROG JUICER UNIVERSAL AND AUTO REVERSER

    DFJ003U DUAL FROG JUICER UNIVERSAL AND AUTO REVERSER

    £36.75
OUR STORY

ESTABLISHED IN 2005

The idea of Digitrains was conceived over the dinner table and grew very slowly as doubts calmed missionary zeal. We finally took the plunge in January 2005 and are fortunate to be dealers for some of the best and most user friendly DCC equipment available.

READ THE FULL STORY

or

Watch our video

Please be aware that we no longer accept cheques as payment