Specifications:
Motor Stall Current: 1A Max
Function Outputs: 4
Function Current: 100mA (each output) Max.
Audio Amplifier: 1W, 8-Ohm Load
DCC Track Voltage: 7.5V - 22V
Measurements:
Length: 27mm
Width: 10.5mm
Depth: 5mm
Decoder Features:
Compatible with NMRA DCC Standards & RPs
28-function support, plus directional and E-Stop functions
Flex-Map function mapping to easily assign any function to any function key
High-quality 16-bit sound
40+ sound effects in each version
Selectable exhaust chuffs or prime movers
Function-activated brake with synchronized sound effect
7-Band Equalizer
20 selectable Hyperlight effects
Hyperdrive2 advanced motor control and Switching Mode for enhanced slow-speed control
Motor-synced Dynamic Digital Exhaust (steam)
Standard, 3-point, and user-loadable speed curves
Operates on DCC and DC layouts
Diesel Sound Effects:
6 UK Prime Movers (English Electric Class 20, Brush Traction Class 31, English Electric Class 37, Brush Traction Class 47, Alstom Class 66/67 (EMD 710), and BR Derby Class “Lightweight” DMU), Startup, Shutdown, and multiple Exhaust Notches; 10 Airhorns, 2 Compressors, 4 Couplers with buffers, Dynamic Brake, Radiator Fans, and more!
For each horn selected, both a high and low tone are available (playable on F1 & F2). F3 plays a pre-recorded “Two-Tone” sequence based on the horn set selected. If CV 121 is set to a non-zero value, the alternate horn in the reverse direction is enabled.
A Class 37 motor driven air compressor has been included as the default air compressor.
The idea of Digitrains was conceived over the dinner table and grew very slowly as doubts calmed missionary zeal. We finally took the plunge in January 2005 and are fortunate to be dealers for some of the best and most user friendly DCC equipment available.