Sound Decoder Function Key DS024G LMS Garratt Project
A generic soundalike project prepared using available articulated loco sounds and LMS whistles.
There are no claims made for genuine authenticity.
F0 Lights if Fitted
F1 Sound on/off + Aux 1
F2 Playable Whistle
F3 Short Whistle
F4 Safety Valve
F5 Fireman, Plus Aux 1 configured for firebox glow if fitted, green wire.
F6 Guard’s Whistle
F7 Buffer up and coupling
F8 Configured for smoke unit if fitted on Aux 2, purple wire.
F9 Injector
F10 Rail clack
F11 Cylinder blow out
F12 Sanding valve
F13 Brake release / set
F14 Air pump
F15 Rail clank
For “Auto tune up” if loco jerky at low speed. Put loco on track and select address Ensure enough room for loco to run for a few seconds while procedure takes place Set CV54 to 0, Program on main. Press F1 Loco will set off and learn all relevant motor settings. When it stops the sound will start and the process is complete. For the full English Loksound V4.0 manual please go to the South West Digital website and download a copy from there.
The idea of Digitrains was conceived over the dinner table and grew very slowly as doubts calmed missionary zeal. We finally took the plunge in January 2005 and are fortunate to be dealers for some of the best and most user friendly DCC equipment available.