DTX022 DRS1 MKIII TRANSMITTER 868MHZ

£45.85
Order number: DTX022 Manufacturer: Tam Valley Depot
Availability: Out of stock
SKU
DTX022
Simply connect to the back of your command station to the rail outputs and place in the center of the room near the ceiling. Use twisted pair or speaker cable for long runs (> 10 ft) back to the command station. Since the transmitter only draws 21 mA, the wire can be as small as 28 ga. Only one transmitter is needed for the entire layout. This device transmits low power radio frequencies on the Instrument-Scientific-Medical (ISM) band (also used by 900 MHz cordless phones) with a range of about 50 feet. Dimensions are 79mm (3.125") 20mm (0.812") long by 15mm (0.635") thick. Operates on the 868 MHz "euro" ISM band and pairs with the 869 MHz receiver.
More Information
Featured Product No

Best Selling Products

OUR STORY

ESTABLISHED IN 2005

The idea of Digitrains was conceived over the dinner table and grew very slowly as doubts calmed missionary zeal. We finally took the plunge in January 2005 and are fortunate to be dealers for some of the best and most user friendly DCC equipment available.

READ THE FULL STORY

or

Watch our video

Please be aware that we no longer accept cheques as payment