Multipack consisting of 20 x 470 uF electrolytic capacitor, 35 V, 8 x 20 mm (diameter x length) and 20 x 680 uF electrolytic capacitor, 35 V, 10 x 25 mm
For 10 - 20 Zimo decoders WITH 25 V - Energy storage port (= integrated energy storage circuit) - MX631, MX632, ..., MX644, ..., various older types such as the MX640, MX642, .. all: "MTC-like" types.
In these cases capacitors are used exclusively (no other components) to connect to the appropriate wires (gray, blue) or solder pads or through the MTC interface connector available.
It can and should be to increase the effect of several electrolytic capacitors are used for each engine (in parallel, depending on the space).
The assortment contains ELKSOMT:
Note: in most cases would also 25 V - enough capacitors; applications only with AC analog (Märklin Umschaltepuls) may be required 35 volts.
The idea of Digitrains was conceived over the dinner table and grew very slowly as doubts calmed missionary zeal. We finally took the plunge in January 2005 and are fortunate to be dealers for some of the best and most user friendly DCC equipment available.