ZIMO MX648R SOUND DECODER The MX648 series is the latest, and smallest, ZIMO sound decoder for N and most OO/HO use. They have advanced capabilities, good continuous 0.8A load rating and high power sound output for their size.
The MX648R has a wire harness with NEM652 8 pin plug. Speaker not included.
GENERAL Does not include speaker 20 x 11 x 4mm. 14, 28 or 128 speed step (256 or 1024 internal steps). Ops and service mode programming. Drive on DC Software upgradeable (Requires MXULF module or a ZIMO DCC System). Overload and overheat protected. Motor Drive 0.8 Amp continuous, 1.5 Amp peak. Silent motor drive at 20 or 40 kHz. Suitable for all DC motors including coreless. Individual speed curves. Automatic drive optimization but can be manually adjusted. Functions 6 function outputs including 2 for SUSI / Logic level. Max total all functions 0.5 Amps. Full function mapping F0 to F12. Full lighting functions; dim, flash, mars, strobe etc.. Train Control & Feedback Brake on DC. Lenz ABC (asymmetric brake control). Zimo braking modes. Constant braking distance. RailCom equipped. Sound Amplifier - 1 Watt. 16 Bit sound processor. 32 Mbit sound storage. Speaker Impedance - 8 Ohmsminimum ( 4 Ohm not recommended) Steam chuff synchronisation can be by CV or by using a hardware trigger, e.g. a cam or other sensor, installed by the user.
The MX648 series can be programmed with any of the DigitrainSound "ZS" soundfiles.