Without doubt still the best combination of power, value, functionality and ease of use in any entry level DCC system.
This unit has enough power to easily keep 6 N or OO gauge locos in motion at the same time. Will happily run modern single motor O gauge models too.
Loco Address Range 1-127 short addresses and 0001-9999 long addresses.
Accessory Address Range 1-2044. For point and signal control.
28 Functions + F0F and F0R.
6 loco recall memory
Old style and Advanced consisting.
Route setting.
Both Full read/write programming track functionality and POM.
Up to 3 additional Cabs including the new WFD-30 wifi cab interface from WiFiTrax + it can use up to 3 other non cab input devices such as AIUs, Mini-Panels and the NCE USB computer interface.
Installation is easy; connect two wires to your track and plug in the cab. You are off and running trains!
Includes new UK three pin power supply. 13.8V 30W. P114UK.
Easier programming than any other DCC system.
When your railway grows you add the SB5 smart booster or PHBOX and your PowerCab automatically becomes a "ProCab" . Can also be used with their "Power House Pro" 5 or 10 Amp systems as an additional cab in the same way.
Does not drive analogue locos without a decoder.