This is a nominal cost preload for your selected Loksound/ESU sound decoder purchase. Cannot be purchased on its own.
Remember to specify 8 or 21 pin fitment.
Also available as a £10.00 sound decoder reblow plus postage which will vary if you send the decoder or the whole loco. Check decoder type and soundfile match. Please telephone or email to arrange this service.
NEW v4 Class 56
SET FUNCTION BUTTON TO MOMENTARY OR LATCH
MOTION AND SPEED DEPENDENT
SCROLL (ON/OFF RAPIDLY IF LATCHED) THRU FOUR SETTINGS OR HOLD FOR MUTE
LATCHED ON, COMP WORKS WHEN RQD
Project designed to work on 128 speed steps
On setting off, (step settings approximate)from a stand selecting 1-32 steps gently pulls away, selecting over 32 throttles right up then drops down to the Drive sound appropriate to the speed
1-16 = D1
16-32 = D2
32-75 = D3
75+ = D4
gentle decceleration drops down thru the Drive steps
rapid deceleration reverts to coast / idle