51968 The 21 MTC adaptor board 2 is suitable for digitising a loco without interface.
It is very helpful, if you do not intend to wire the decoder or if you wish to use more than four function outputs on your LokPilot or LokSound decoder.
This adaptor board simulates the typcial size and shape of Märklin® 6090x-decoders and can be installed in any suitable position.
The 21 MTC adaptor board 2 is suitable for digitising a loco without interface. It is very helpful, if you do not intend to wire the decoder freely or if you wish to use more than four function outputs on your LokPilot or LokSound decoder. This adaptor board simulates the typcial size and shape of Märklin® 6090x-decoders and can be installed in every suitable position.
Decoders with 21MTC connectors (ESU LokPilot or LokSound favoured) are simply plugged onto the adaptor board.
On the output side, the adaptor offers already soldered cables (appr. 20cm length) for all contacts needed. Thus the wiring of your loco is child´s play. There are amplifiers (appr. 250mA each) for function AUX3 and AUX4 (the decoder´s logical outputs) so that ESU decoders have up to 6 available physical function outputs.
The idea of Digitrains was conceived over the dinner table and grew very slowly as doubts calmed missionary zeal. We finally took the plunge in January 2005 and are fortunate to be dealers for some of the best and most user friendly DCC equipment available.
MENU
