This is a nominal cost preloadable soundfile for you Loksound decoder purchase. Cannot be bought on it's own.
DS030 BR / LNER Steam locomotives J15
F0 Lights if Fitted
F1 Sound on/off
F2 J15 Whistle
F3 J15 Pop Whistle
F4 Cylinder Drain Cocks
F5 Flange noise
F6 Injector
F7 Watering
F8 Mute / Vol
F9 Two Speed Westinghouse Pump
F10 Blower
F11 Coupling
F12 Fireman
F13 Platform Whistle
For “Auto tune up” if loco jerky at low speed. Put loco on track and select address Ensure enough room for loco to run for a few seconds while procedure takes place Set CV54 to 0, (Programming on main track). Press F1, Loco will set off and learn all relevant motor settings. When it stops the sound will start and the process is complete.
Chuff CVs 57=172 58=95
Westinghouse pump is automatic when F9 activated if your model is not fitted with a pump don’t use F9.
See English user manual for all decoder details and warranty terms. Downloadable in English from the ESU or South West Digital website.
| Featured Product | No |
|---|
MENU
