Lenz 10231-02 Standard V2
Order Number : 10231-02
The DIGITAL plus STANDARD locomotive decoder is suitable for all DC
locomotives with continuous current draw of 1.0 Amp.or less.
The DIGITAL plus STANDARD locomotive decoder is suitable for all DC
locomotives with continuous current draw of 1.0 Amp.or less.
The characteristics of the decoder are:
Super smooth and silent high frequency back-emf motor control.
Adjustable precision stopping control
Shunting Speed on F3
Selectable for operation with 14/27, or 28/128 speed steps.
Operation on conventional DC layouts is possible or can be disabled.
Motor output = 1A continuous, 1.8A max,.
Motor and function outputs protected
Four function outputs rated at 150mA each with advanced function mapping
Function outputs can be set to a timer for electronic uncoupling
Directional or independent lighting with dimming and special effects.
Support for Multiple traction and long addresses (Loco addresses up to 9,999)
Support for programming on the mainline (Programming on Main POM)
Support for all forms of programming as described in NMRA RP-9.2.3
RailCom
Size: L 25mm x W 15mm x H 3.8mm
The idea of Digitrains was conceived over the dinner table and grew very slowly as doubts calmed missionary zeal. We finally took the plunge in January 2005 and are fortunate to be dealers for some of the best and most user friendly DCC equipment available.