These boards can be used to make locomotive Power Districts or an Accessory District with a shared power supply. A jumper is used to set either Accessory Mode or Power District Mode.
Each board can supply up to 3 Amps continuous duty and 5 Amp peak with a suitable power supply. These boards work very nicely with the Hex Frog Juicer.
Max power input voltage: 40V
Power Connector: 5.5 mm (outer)/ 2.1 mm (inner) barrel plug, center positive
DCC input: optically isolated, 5-24 Volts
DCC Connectors: Screw blocks
Max output: 5 Amps for short periods, 3 Amps continuous
Short Trip Point: 5.6 Amps
Short Trip Off Time: 1 microsecond
Short Trip Recovery Time: 200 microseconds
Board Size: 3" x 2.5" (76mm x 64 mm)
A separate power supply is required and we recommend:
TRDAB16 for Power Districts. 16V DC @ 4.5 Amps
TRDAB12 for an accessory bus. 12V DC @ 5 Amps