The SwitchWright is a newly designed servo bracket made out of laser-cut aircraft-grade plywood to make it rigid and durable. It holds the servo securely with two screws. The kit comes with everything you need - the mount, the wire, mounting screws for the servo and for mounting the bracket to the layout. We also include a piece of double-sided foam tape for holding the bracket in place until you can get the mounting screws in place.
Specs
Actuating Wire- .032" steel music wire. Length - 5" before assembly; 3" usable length after assembly (maximum thickness of subroadbed + track height)
Bracket Size - 1.97" wide x 1.138" deep X 1.0" high
Fits servo size 0,87" (22mm) wide x .47" (12mm) deep (SG90, 9g servos).
Minimum mounting clearance under layout - 1.375"
Mounting Screws - #6 x 1/2" for bracket to layout; #2 x 5/16" for servo to bracket
Material - 1/8" Laser-cut Spruce Plywood
Scales - Z to O
The idea of Digitrains was conceived over the dinner table and grew very slowly as doubts calmed missionary zeal. We finally took the plunge in January 2005 and are fortunate to be dealers for some of the best and most user friendly DCC equipment available.