A four output DCC Accessory Decoder which is easy to fit and just requires two wires to your DCC Bus. Use the screw terminals to attach your solenoid point motor to the decoder and attach the power wires to the nearest piece of track or accessory bus wire. This unit features a built in CDU for efficient operation of solenoid motors.
This unit is easy to programme too, just press the "LEARN" button and enter an address on your DCC controller. Using this method you can easily synchronise points and signals together by giving them the same address.
The idea of Digitrains was conceived over the dinner table and grew very slowly as doubts calmed missionary zeal. We finally took the plunge in January 2005 and are fortunate to be dealers for some of the best and most user friendly DCC equipment available.
MENU
