Zimo MSTAPK Decoder Tester

Includes 1x Zimo MSTAPK decoder tester, 1x 2 pin plug for connecting a programming track and 1x SUSI cable.

• Connect your DCC programming track or sound loading device to the tester using the screw terminals on the 2 pin plug
• Two LED’s labelled ‘L’ and ‘R’ will light when DCC power is connected and turned on
• A handy DCC power on/off push button is provided next to the 2 pin plug
• Handy push-down ‘screw’ terminals for hardwire decoders – push down to secure each wire instead of excess use of a screwdriver!

The tester includes:

• A motor
• 8Ohm 1W Zimo 18x13x13mm cube speaker, an excellent sounding speaker
• 9 LED’s to test 9 function outputs of the decoder
• Connection points for an additional external motor and speaker
• SUSI connection, useful for super fast Zimo sound loading

Decoder interfaces include:

• Hardwire (15 ‘screw’ terminals)
  • 2x LS = Speaker connections (not polarity sensitive)
  • SL = Track Left (schiene left)
  • SR = Track Right (schiene right)
  • M – = Motor negative
  • M + = Motor positive
  • LV = Front light
  • LR = Rear light
  • F1-F7 = Function outputs 1 – 7
• 21MTC – (compatible now with new 21MTC MS440C & -D sound decoders)
• NEM652 (8 pin)
• NEM651 (6 pin)
• PLUX22/PUX16/PLUX12/PLUX8
• NEXT18