The YaMoRC solution for switching and signaling: our 16-fold signal/switching decoder.
It presents the following features:
Sixteen independent 2.5Amp MOSFET outputs
Max 5 Amp combined current
Very simple basic-setup (base address), by pressing the programming button and switching the desired turnout address
No complicated CV settings.
Clear text configuration based upon our new ES-Link technology.
With our YD9101-Config or YD7100-Command, configuration can be done via built-in web interface: No need for PC-software or Phone/Tablet Apps!. Configuration also over USB from PC Software on the mentioned devices as well as our YD6016LN.
All of the 16 outputs are freely configurable from 16x simple on-off to complex and elaborate signals with up to 8 LEDs/lamps
Each defined device (signal, switch, turnout) can have its own address
Devices can be operated by the new DCCext standard or conventional turnout DCC-commands (throw/close)
Numerous predefined signal definitions for Dutch, German (H/V, Ks and Form) British and Swiss prototypical signals
Signals can include fading (Bulbs emulated in case of LEDs) dark-phase inclusion, black-out based on previous signal's state
Outputs can be time-limited e.g. for light coil-motors
Settable night-dimming for the complete decoder, with configurable address / decoder
The idea of Digitrains was conceived over the dinner table and grew very slowly as doubts calmed missionary zeal. We finally took the plunge in January 2005 and are fortunate to be dealers for some of the best and most user friendly DCC equipment available.