A 4 output accessory decoder with feedback to show accessory position or status. 3A max output so recommend a separate power input supply not exceeding this value.
The accessory decoder receives the commands send by the central command station through the power module and, for example, controls the switch machines on your turnouts (or the other devices). The commands are initiated from your input devices, such as the Basic Hand Held LH100,
•The accessory decoder LS100 is equipped with 4 outputs, with 3 terminals (+,C,-) each. These outputs can be connected to 4 twin-coil switch machines (or twin-coil actuators for your signals). The LS100 also has a connection for the feedback bus of the DIGITAL plus system. If the feedback bus is connected, then the position of turnouts can be sent back to the system when using suitable turnout drives. It is then possible to display a turnout being thrown by either DCC or by hand
The idea of Digitrains was conceived over the dinner table and grew very slowly as doubts calmed missionary zeal. We finally took the plunge in January 2005 and are fortunate to be dealers for some of the best and most user friendly DCC equipment available.