Sound Decoder Function Key This is a soundfile prepared by Tony Molyneux 9F Steam locomotives
F0 Lights if Fitted
F1 Sound on/off + Aux 1
F2 Playable Whistle
F3 Short Whistle
F4 Safety Valve
F5 Fireman + Aux 1
F6 Guard Whistle
F7 Injector
F8 Vol /Mute
F9 Flange noise
F10 Air release
F11 Brakes release
F12 Acceleration on/off
F13 Aux 2 See user manual for full range of decoder specifications
For “Auto tune up” if loco jerky at low speed. Put loco on track and select address Ensure enough room for loco to run for a few seconds while procedure takes place Set CV54 to 0, Program on main. Press F1 Loco will set off and learn all relevant motor settings. When it stops the sound will start and the process is complete.
The idea of Digitrains was conceived over the dinner table and grew very slowly as doubts calmed missionary zeal. We finally took the plunge in January 2005 and are fortunate to be dealers for some of the best and most user friendly DCC equipment available.