The FWA-20 provides capability to use our WifiTrax Workshop Windows software to update the firmware in your WifiTrax module.
The module contains a USB/Serial adapter chip mounted on a PCB and with grabber leads attached.
The ribbon cable is attached to the 6-pin socket on on your WifiTrax module to communicate with the serial interface of the on-boad microprocessor.
Attaching the module forces the microprocessor into boot mode which allows loading of firmware updates from WifiTrax using our WifiTrax Workshop software.
You can also use the module to perform other serial operations with the module as may be later defined.
The idea of Digitrains was conceived over the dinner table and grew very slowly as doubts calmed missionary zeal. We finally took the plunge in January 2005 and are fortunate to be dealers for some of the best and most user friendly DCC equipment available.
MENU
